Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Flywheel Oil Seal on a Beta 300

Model: Beta Beta 430
Part:

Video tutorial

In today's video, we will see how to replace the flywheel side oil seal on a Beta 300. First, unscrew the bolts of the cover using an 8 mm socket: mark their position as the bolts are of different lengths. Now remove the cover and take out the gasket: disassemble the flywheel using a puller; unscrew the nut and extract it. Now use something sharp or a screwdriver to pry out the oil seal, as shown in the video.

Reassemble everything, lubricating the new oil seal and refitting it in place.


Updated on 22 March 2026 by ScegliAuto


Related tutorials

Oil Change for Beta 430 4T
Oil Change for Beta 430 4T
Beta 430 In this video tutorial, you will learn how to replace the gearbox oil on various Beta 4-stroke models, particularly the 430, 500, and 350. First, rem…
Replacing the Swingarm Bearings on a Beta 400
Replacing the Swingarm Bearings on a Beta 400
Beta 430 Remove the lower side panels on both sides by unscrewing the various bolts, then detach the brake caliper from the disc. At this point, remove the ch…

How to Reset the Service Light on a Vespa Sprint 150?

To reset the Service light on a Vespa Sprint 150, insert the ignition key into the corresponding lock. Once turned to activate the instrument panel, press and hold the button located on the right side of the handlebars. Wait a few seconds with the button pressed until the Service light disappears from the instrument panel. Once the light has been reset, release the button and turn off the ignition by turning the key.

Watch the video!


by ScegliAuto

More videos