Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Model: Beta Beta 430
Part:

Remove the lower side panels on both sides by unscrewing the various bolts, then detach the brake caliper from the disc. At this point, remove the chain using pliers and a flat screwdriver (as shown in the video) and the rear wheel by unscrewing the central spindle. Once you reach this point, you can also remove the swingarm by taking out the central fixing spindle, which is held by a 13 mm bolt on one side and a 17 mm bolt on the other. Slide it out from the bike and place it on a workbench. Here, you can now replace the bearings before starting the reassembly.

Updated on 13 April 2026 by ScegliAuto

Video tutorial

Related tutorials

Replacing the Flywheel Oil Seal on a Beta 300
Replacing the Flywheel Oil Seal on a Beta 300
Beta 430 In today's video, we will see how to replace the flywheel side oil seal on a Beta 300. First, unscrew the bolts of the cover using an 8 mm socket: ma…
Oil Change for Beta 430 4T
Oil Change for Beta 430 4T
Beta 430 In this video tutorial, you will learn how to replace the gearbox oil on various Beta 4-stroke models, particularly the 430, 500, and 350. First, rem…

How to Replace the Engine Cover on a Honda CB 650R

This guide provides instructions for removing and replacing the engine cover on a Honda CB 650R motorcycle, following these simple steps. First, place your motorcycle on the centre stand and start by unscrewing the oil drain bolt located under the engine, allowing it to drain into a container for about ten minutes. Then, unscrew all the screws from the cover or engine casing found on the right, as shown in the video. At this point, install the new cover, ensuring to replace the gasket and clean the base thoroughly.

Watch the video!


by ScegliAuto

More videos