Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Oil Change for Beta 430 4T

Model: Beta Beta 430
Part: Transmission fluid

Video tutorial

In this video tutorial, you will learn how to replace the gearbox oil on various Beta 4-stroke models, particularly the 430, 500, and 350. First, remove the old oil by taking off the metal cover located under the engine, unscrewing the fastening screws.

Next, unscrew the oil drain bolt and let the oil drain out for about twenty minutes before refitting the bolt.

At this point, open the top cap and insert the new engine oil of the correct type, filling it up to the maximum level: follow the video until the end!


Updated on 4 April 2026 by ScegliAuto


Related tutorials

Replacing the Flywheel Oil Seal on a Beta 300
Replacing the Flywheel Oil Seal on a Beta 300
Beta 430 In today's video, we will see how to replace the flywheel side oil seal on a Beta 300. First, unscrew the bolts of the cover using an 8 mm socket: ma…
Replacing the Swingarm Bearings on a Beta 400
Replacing the Swingarm Bearings on a Beta 400
Beta 430 Remove the lower side panels on both sides by unscrewing the various bolts, then detach the brake caliper from the disc. At this point, remove the ch…

How to Reset the Service Light on a Vespa Sprint 150?

To reset the Service light on a Vespa Sprint 150, insert the ignition key into the corresponding lock. Once turned to activate the instrument panel, press and hold the button located on the right side of the handlebars. Wait a few seconds with the button pressed until the Service light disappears from the instrument panel. Once the light has been reset, release the button and turn off the ignition by turning the key.

Watch the video!


by ScegliAuto

More videos