Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
  1. Motorcycles
    2. :
  2. Beta
    3. : Beta 125 Rr
Discover in this video how to change the gear and clutch oil on the Beta 125 RR 2-stroke enduro bike, as well as on the 200 and 50 models. First, remove the metal cover located under the engine; then unscrew the oil drain bolt using a socket wrench with an extension. At this point, allow the old oil to drain into a container for about ten minutes; then replace the drain bolt and open the fill cap, pouring in the new engine oil to the correct level (in this case, a 10w40).

Updated on 4 May 2026 by ScegliAuto

Video tutorial

Related tutorials

Replacing the Sprocket on the Beta RR 125
Replacing the Sprocket on the Beta RR 125
Beta 125 Rr In this video tutorial, you will learn how to remove and replace the transmission sprocket on the Beta RR 125 enduro bike in simple and quick steps. …

How to Change the Engine Oil on a Harley Davidson Street 750

To change the engine oil on the Harley Davidson Street 750, loosen the bolts securing the radiator plate to access the drain plug located at the bottom centre of the bike. This plug must be unscrewed to collect the oil in a suitably positioned container. The oil filter is located on the lower side of the bike and should be removed from its housing and replaced with a new part. After replacement, pour the new oil through the breather located on the right side of the vehicle.

Watch the video!


by ScegliAuto

More videos