Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Model: Beta Rr 125 Lc
Part: Engine oil

In this video tutorial, you will learn how to perform the routine maintenance oil change on a Beta RR 125 LC by following these simple steps. First, warm up the engine for a few minutes and start by unscrewing the oil drain bolt located under the engine, allowing it to drain into a container for about ten minutes using a 19 mm spanner; then unscrew the screws of the oil filter cover using an 8 mm spanner. Now, replace the filter with a new one and unscrew the filler screw; then pour in the new engine oil!

Updated on 9 May 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Change the Oil and Oil Filter on a Beta RR 125 LC
How to Change the Oil and Oil Filter on a Beta RR 125 LC
Rr 125 Lc In this short video, you will see the steps to change the oil and oil filter while performing the regular maintenance service on a Beta RR 125 LC end…
How to Change the Engine Oil on a Beta RR 125 LC
How to Change the Engine Oil on a Beta RR 125 LC
Rr 125 Lc In this guide, discover the procedure necessary to carry out the routine maintenance oil change for the Beta RR 125 LC enduro bike. First, unscrew th…
How to Change the Engine Oil and Filter on a Beta RR 125 LC
Rr 125 Lc How do you maintain your motorcycle? Let’s see the engine oil and filter change on a Beta RR 125 LC. Position the motorcycle on a centre stand; remov…

Servicing a Honda SH300 Scooter

How to service the SH 300 scooter. This operation should be done with the engine cold. Remove the cover and take out the air filter, cleaning the compartment where the new one will be placed. Refit the three screws you removed earlier and reassemble the cover. Remove the oil cap, take a 12 mm spanner and unscrew the oil plug from underneath. Allow the oil to drain into a suitable container, which you will then dispose of at an authorised centre. Remove the filter, clean the cavity where the new one will be fitted, and tighten it with the spanner. Refit the oil cap screw. Always change the washer on the cap. Now, refill with oil. You will need a synthetic oil like Motul 5100 10W40, which costs £12.40 per litre on Amazon. If you are doing a complete change, you will need two cans, as you will require 1.6 litres including the filter. After adding the oil, let it rest for a few minutes, then run the engine for a few minutes and check the level. If necessary, top it up: it should be halfway between min and max.

Watch the video!


by ScegliAuto

More videos