Do it yourself
Frequently asked questions about cars and motorcycles

Model: Beta Alp
Part: Air filter

To replace the air filter on a Beta Alp, loosen the bolts securing the seat so that it can be lifted and removed from its housing. This will provide access to the components underneath: here, disconnect the battery and remove it from its location. This will allow access to the air filter at the front, which must be released from its mounting pin and replaced with a new spare part; after replacement, refit all parts that were previously removed.

Updated on 2 June 2026 by ScegliAuto

Video tutorial

Related tutorials

Alp To replace the air filter on the Beta Alp, completely detach the seat from its mount by inserting the key into the lock located at the rear of the se…
Alp To replace the air filter in a Beta Alp, lift the seat of the motorcycle by unscrewing the fixing screw located at the front. Once this screw is remo…
Alp This guide explains how to perform the routine maintenance service by changing the engine oil and oil filter on the Beta Alp 200 enduro bike. First, …

How to reset the oil change light on a Suzuki Burgman 650

Reset the service light on a Suzuki Burgman 650 after completing the required services: First, turn on the ignition. Then, press the button on the left of the instrument panel four times until the mileage until the next service appears. Hold it down for a couple of seconds. On the right side of the instrument panel, there is another button. Press this for a couple of seconds, and the oil light will start to flash. Use the left button to gradually decrease the mileage until you reach the distance at which you want to change the oil again. The YouTuber sets it to 3,000 miles. To confirm, press and hold the left button, and the reset is complete.

Watch the video!


by ScegliAuto

More videos