Do it yourself
Frequently asked questions about cars and motorcycles

Model: Beta Rr 300
Part: Starter motor

In order to replace the starter motor of the Beta RR 300 it is necessary to loosen the bolts that fix the stator casing, positioned on the right side of the bike in a central position: after the casing has been removed, it will be possible to remove the stator which is inside it, also removing the corresponding gear. In doing so, the starter motor can be released from its seat, so that a new spare part can be inserted. After installation you will need to refit the stator and corresponding crankcase, making sure everything is working properly.


Posted on 19 August 2024 by ScegliAuto



How to overhaul the fork of the Beta RR 300
Rr 300 Today, in this guide, let's see how to carry out a complete overhaul of the Beta RR 300 fork, following the instructions below. First of all we put o
How to remove the Beta RR 300 radiator
Rr 300 In this video tutorial we will see how to disassemble and replace the cooling radiator of the Beta RR 300 enduro motorcycle, following the instructio
How to service the Beta RR 300
Rr 300 Let's see today, in this short and simple guide, how to carry out the routine maintenance coupon, replacing the transmission oil, of the Beta RR 300

How to change the engine oil in the Piaggio Vespa GTS 300 scooter?

As we can see in this tutorial, replacing the motor oil in the Piaggio Vespa 300 GTS scooter is an extremely simple and fast operation. First of all, we wait for the engine to be cool enough, then we position a container underneath it and, using a 24mm socket wrench, we unscrew the drain plug. Then we unscrew the filter using pliers, let all the oil in the system drain out and insert the replacement. At this point, all that's left is to tighten the plug and add the required amount of oil through the appropriate upper hole.

Watch the video!


by ScegliAuto

More videos