Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
Today, in this brief and simple guide, service the regular maintenance by replacing the transmission oil in the Beta RR 300 enduro bike. First, place your bike on a stand and start unscrewing the oil drain bolt located under the engine; then clean the drain plug thoroughly from any metal debris. At this point, unscrew the oil fill screw, using a funnel for topping up; use the correct viscosity gearbox oil, filling to the maximum level!

Updated on 1 July 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Service the Fork on a Beta RR 300
How to Service the Fork on a Beta RR 300
Rr 300 In this guide, we will see how to carry out a complete service on the fork of the Beta RR 300, following the instructions below. First, place your bi…
Performing a Service on a Beta 300 RR
Performing a Service on a Beta 300 RR
Rr 300 In this video, you will learn how to replace the engine oil on a Beta RR 300 enduro motorcycle, performing the regular maintenance service. First, wa…
How to Change the Transmission Oil on the Beta RR 300
How to Change the Transmission Oil on the Beta RR 300
Rr 300 Below is the procedure for performing the routine maintenance service, changing the transmission oil on the Beta RR 300. First, place the bike on its…

How to reset the oil change light on a Suzuki Burgman 650

Reset the service light on a Suzuki Burgman 650 after completing the required services: First, turn on the ignition. Then, press the button on the left of the instrument panel four times until the mileage until the next service appears. Hold it down for a couple of seconds. On the right side of the instrument panel, there is another button. Press this for a couple of seconds, and the oil light will start to flash. Use the left button to gradually decrease the mileage until you reach the distance at which you want to change the oil again. The YouTuber sets it to 3,000 miles. To confirm, press and hold the left button, and the reset is complete.

Watch the video!


by ScegliAuto

More videos