Do it yourself
Frequently asked questions about cars and motorcycles

Model: Beta Xtrainer
Part: Bearing

To replace the rear wheel bearing on the Beta Xtrainer, remove the wheel from its housing at the end of the swingarm. Take off the screws securing the wheel, remove the central axle, and then unscrew the bolts holding the brake caliper. Once all components are removed, detach the wheel and proceed to extract the bearing at the centre of the wheel using a puller. After removal, insert a new bearing and reassemble all previously removed components.

Updated on 10 August 2026 by ScegliAuto

Video tutorial

Related tutorials

Xtrainer On the Beta Xtrainer, you can completely replace the rear shock absorber by loosening the screws that secure the side panels of the bike, located bet…
Xtrainer In order to replace the fork of the Beta Xtrainer, you need to loosen the screws that secure the front wheel to its housing, disconnecting the corres…
Xtrainer To replace the rear shock absorber on a Beta Xtrainer, loosen the screws that secure the side panels of the bike, located between the rear mudguard a…

What Does the V-Belt Light Indicate on a Yamaha NMAX Scooter and How to Remove It?

If the V-BELT light has illuminated on the instrument cluster of your Yamaha NMAX scooter, it means it is time to replace the drive belt as it has exceeded the relevant interval. You can entrust this maintenance task to your trusted workshop; the cost will not be particularly excessive. Once this is done, you can manually reset the light by following the procedure shown in this tutorial. First, turn on the instrument cluster, then repeatedly press the left button on the dashboard to reach the service interval in question. At this point, press and hold the right button once to initialise the reset, and a second time to complete it.

Watch the video!


by ScegliAuto

More videos