|
Do it yourself
| |||
| ||||
To replace the clutch on a Beta Evo, loosen the circular cover located on the lower central part of the left side of the bike. Once the screws of the cover have been loosened, you can completely remove it, gaining access to the clutch underneath. This can be removed from its housing by unscrewing the screws that hold it in place and extracting all the discs that make it up. After removing the discs, you can insert the new ones into their housing, securing them with the appropriate bolts and checking that everything functions correctly.
Updated on 27 August 2026 by ScegliAuto
Video tutorial
Related tutorials
Evo
The clutch replacement on the Beta Evo must be done by removing the circular cover located in the central lower part of the left side of the motorcyc…
Evo
In today's tutorial video, you will learn how to replace the engine oil of the Beta Evo, following the instructions below. First, place the motorcycl…
Evo
This guide provides instructions for replacing the transmission oil in the Beta Evo 300 motorcycle. First, place the motorcycle on a stand and begin …
|
How to Replace the Transmission Oil of the Peugeot Elyseo 50
Follow these steps to drain and replace the transmission oil of the Peugeot Elyseo 50 scooter. First, place your scooter on the centre stand and start by unscrewing the oil drain bolt located under the transmission cover, using a 10 mm spanner; allow the oil to drain into a container for about ten minutes, as shown in the video. Next, unscrew the fill screw located at the top and top up with new transmission oil, pouring in the appropriate type! by ScegliAuto More videos
|
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.125
(c) ScegliAuto 2026 - info@scegliauto.com - Privacy policy VAT number: IT01247470535 |
