Do it yourself
Frequently asked questions about cars and motorcycles

Model: Beta Evo
Part: Clutch

The clutch replacement on the Beta Evo must be done by removing the circular cover located in the central lower part of the left side of the motorcycle: once the fixing screws of the cover are loosened, it will be possible to remove it completely, accessing the underlying clutch. The clutch can be removed from its seat by loosening the screws that hold it in place and removing all the discs that make it up; after removing the discs, it will be possible to insert the new ones in their respective seat, fixing them with the appropriate bolts and verifying that everything is functioning properly.

Posted on 25 July 2024 by ScegliAuto

Video tutorial

Related tutorials

Evo To replace the clutch on a Beta Evo, loosen the circular cover located on the lower central part of the left side of the bike. Once the screws of the…
Evo This guide provides instructions for replacing the transmission oil in the Beta Evo 300 motorcycle. First, place the motorcycle on a stand and begin …
Evo In today's tutorial video, you will learn how to replace the engine oil of the Beta Evo, following the instructions below. First, place the motorcycl…

How to Replace the Fork Seal on a Malaguti XSM 125?

To replace the fork seal on a Malaguti XSM 125, loosen the bolts that secure the fork to its housing: these screws will be located at the top of the fork, just below the handlebars, and at the bottom near the wheel. Once all the bolts are loosened, you can free the wheel from its housing, allowing the fork to be detached as well: the seal at the top can be removed using a tool, so it can be replaced with a new one.

Watch the video!


by ScegliAuto

More videos