Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Model: Bmw R1250 Gsa
Part: Engine oil

In this tutorial we can see how to replace the engine oil in the BMW R1250 GSA, an extremely simple and quick operation. First of all, make sure that the engine is sufficiently cold, then remove the lower protective cover and place a container under the engine. Next, locate the drainage hole bolt, unscrew it using a 10mm hex key, and let all the oil in the system drain out. At this point, all that remains is to unscrew the old filter, tighten both the replacement and the bolt, and add the necessary amount of oil through the appropriate hole.

Posted on 19 August 2024 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Remote Battery of the BMW R1250 GSA?
How to Replace the Remote Battery of the BMW R1250 GSA?
R1250 Gsa As shown in this tutorial, replacing the remote battery of the BMW R1250 GSA is an extremely simple and quick operation. For this, you will need a re…
How to Replace the Front Brake Pads on a BMW R1250 GSA?
How to Replace the Front Brake Pads on a BMW R1250 GSA?
R1250 Gsa You can replace the front brake pads on a BMW R1250 GSA by loosening the bolts that secure the brake caliper to its housing: once the caliper fixing …
How do you replace the tank of the BMW R1250 GSA?
How do you replace the tank of the BMW R1250 GSA?
R1250 Gsa In order to replace the fuel tank of the BMW R1250 GSA, you need to loosen the screws that secure the side panels of the tank. Once these panels are …

How to Remove the Rear Wheel on the BMW G650 GS?

In this tutorial, you will see how to remove the rear wheel on the BMW G650 GS, a very simple operation. First, lift the motorcycle from the central area using a stand or a jack, then undo the right nut with a 24 mm socket and the left one with a 19 mm spanner. Once done, using a Torx T40 key, unscrew the two chain tensioner bolts exactly half a turn each, until you loosen the tension. Finally, push the wheel towards the inside of the motorcycle, remove the chain from the sprocket, and extract the inner pin using a hammer.

Watch the video!


by ScegliAuto

More videos