Do it yourself
Frequently asked questions about cars and motorcycles

How to Replace the Fuel Tank on the BMW R1250 GSA

Model: Bmw R1250 Gsa
Part:

Video tutorial

To replace the fuel tank on the BMW R1250 GSA, loosen the screws that secure the side covers of the tank. Once these panels are removed, you can proceed to unscrew the bolts that hold the tank in its housing.

After removing these bolts, disconnect all connectors and hoses attached to the tank. You can then completely remove the tank from its position to install the new one. Secure the new tank in place and connect it properly.


Updated on 3 November 2026 by ScegliAuto


Related tutorials

R1250 Gsa As shown in this tutorial, replacing the remote battery of the BMW R1250 GSA is an extremely simple and quick operation. For this, you will need a re…
R1250 Gsa In this tutorial, you will see how to change the engine oil in the BMW R1250 GSA, a very simple and quick operation. First, ensure that the engine is…
R1250 Gsa You can replace the front brake pads on a BMW R1250 GSA by loosening the bolts that secure the brake caliper to its housing: once the caliper fixing …
ScegliAuto offers an extensive international collection of automotive tutorials available in 12 languages. Each guide combines instructional videos with original explanations written by experienced human editors, along with information about the car models covered.

How to Replace the Transmission on a Kymco KXR 250?

To replace the transmission on a Kymco KXR 250, loosen the screws securing the cover located near the rear wheel on the left side of the bike. Once the screws are loosened, remove the cover to access the underlying transmission components. By loosening the central nuts that secure the clutch and variator, both components and the belt around them can be removed. At this point, insert all the new replacement components and check that everything functions correctly.

Watch the video!


by ScegliAuto

More videos