|
Do it yourself
| |||
| ||||
Video tutorial
To replace the water pump of the BMW K100, you need to loosen the screws that secure it to its housing: this will be located in the central lower part of the motorcycle. Once the pump mounting screws have been loosened, you can proceed to detach it from the corresponding gear so that the new one can be inserted: this must be reattached to the respective gear and secured to its housing with the appropriate screws in order to verify that everything works correctly after the replacement.
Posted on 1 February 2025 by ScegliAuto
Related tutorials
K100
You can change the engine oil on a BMW K100 by loosening the drain plug located at the central lower part of the vehicle: once this plug is removed, …
K100
To replace the battery of the BMW K100, insert the key into the lock located to the left of the seat, turning it to release the battery itself: once …
K100
To replace the brake pads on a BMW K100, you need to perform the same operation for both the rear and front wheels. Once the retaining screws of the …
|
How to replace the clutch lever on the Sherco SEF 300?
To replace the clutch lever on the Sherco SEF 300, you need to loosen the screws that secure the lever to its housing on the left side of the handlebars. Once these screws are loosened, you can unscrew the nut at the base of the lever to disconnect the clutch cable attached to the corresponding lever. Once the cable is detached, the lever can be removed from its housing and replaced with a new spare part; after installation, ensure that it functions correctly. by ScegliAuto More videos
|
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.007
(c) ScegliAuto 2026 - info@scegliauto.com - Privacy policy VAT number: IT01247470535 |
