Do it yourself
Frequently asked questions about cars and motorcycles

Model: Bmw K100
Part: Engine oil

You can change the engine oil on a BMW K100 by loosening the drain plug located at the central lower part of the vehicle: once this plug is removed, you can collect all the used oil in a suitably positioned container and also remove the filter located in the same position. At this point, proceed with the top-up: this way, you can insert the necessary amount of oil through the breather on the right side of the bike, ensuring everything functions correctly.

Posted on 28 May 2026 by ScegliAuto

This video is currently unavailable

Related tutorials

K100 Changing the engine oil in a BMW K100 can be done by loosening the drain plug located at the central lower part of the bike: once the plug is unscrew…
K100 To replace the battery of the BMW K100, insert the key into the lock located to the left of the seat, turning it to release the battery itself: once …
K100 To replace the water pump of the BMW K100, you need to loosen the screws that secure it to its housing: this will be located in the central lower par…

How to Check the Coolant Level in a Yamaha Xmax

In the following video, you will learn how to check the coolant level in a 2008 Yamaha Xmax. First, position the motorcycle on a stable surface by raising the stand. Next, lift the cover located at the top of the motorcycle to access the coolant drain bolt. To top up the coolant, unscrew the cap as shown in the video and add the fluid until it reaches the maximum level, indicated as Max. Once finished, close the valve and refit the cover. At this point, start the engine and let it run at idle for a few minutes to eliminate any air bubbles that may have formed inside.

Watch the video!


by ScegliAuto

More videos