Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
After performing the operations related to the service such as replacing the oil and air filters, checking the overall condition of the motorcycle, it is necessary to reset the service light. To reset it on a BMW G310 R motorcycle, we need to turn on the instrument panel and press the button on the left side of the handlebar to access the mileage menu. Immediately after, we continue to press the button to enter the new mileage for the service of the motorcycle. We finish the reset by turning off and on the instrument panel a second time. Resetting the light alone does not solve the problem, so reset the light only after completing the required action.

Posted on 30 May 2025 by ScegliAuto

Video tutorial

Related tutorials

Resetting the BMW G310R Service indicator.
Resetting the BMW G310R Service indicator.
G310 R After changing the engine oil of the BMW G310R, we reset the Service light on the instrument display. We remove the seat and in the compartment we wi…
How to change the engine oil of a BMW G310R?
How to change the engine oil of a BMW G310R?
G310 R To change the engine oil of a BMW G310R, start by positioning the motorcycle on a flat surface and make sure the engine is warm but not too hot. Loca…
How to Replace the Exhaust on a BMW G310 R?
How to Replace the Exhaust on a BMW G310 R?
G310 R You can replace the exhaust on the BMW G310 R by loosening the screws that secure the old exhaust terminal to its housing, located near the rear swin…

How to Remove the Rear Wheel on the BMW G650 GS?

In this tutorial, you will see how to remove the rear wheel on the BMW G650 GS, a very simple operation. First, lift the motorcycle from the central area using a stand or a jack, then undo the right nut with a 24 mm socket and the left one with a 19 mm spanner. Once done, using a Torx T40 key, unscrew the two chain tensioner bolts exactly half a turn each, until you loosen the tension. Finally, push the wheel towards the inside of the motorcycle, remove the chain from the sprocket, and extract the inner pin using a hammer.

Watch the video!


by ScegliAuto

More videos