Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Model: Bmw R1200 GS
Part: Clock

It will be possible to adjust the clock of the BNMW R1200 GS by turning on the instrument panel after inserting the ignition key into the corresponding slot: once the panel is turned on, you can proceed by navigating the menu using the lever on the left side of the handlebar. When the "CLOCK" option is found, it must be selected with the button on the left side of the handlebar: then you will notice that the hours will flash and can be changed with the lever. Now you must confirm the hour change and then modify the minutes in the same way.

Posted on 3 June 2025 by ScegliAuto

Video tutorial

Related tutorials

How do you replace the exhaust pipe of the BMW R 1200 GS?
How do you replace the exhaust pipe of the BMW R 1200 GS?
R1200 GS To replace the exhaust of the BMW R 1200 GS, you need to loosen the screws that hold it to its housing: this will be located next to the rear wheel o…
How to replace the starter motor of the BMW R 1200 GS
How to replace the starter motor of the BMW R 1200 GS
R1200 GS Today's step-by-step instructions will show us how to disassemble and replace the starter motor of the BMW R1200 GS motorcycle. First, we put the mot…
Disassembly and replacement of the alternator belt of the BMW R 1200 GS.
Disassembly and replacement of the alternator belt of the BMW R 1200 GS.
R1200 GS Today's main instructions will show us how to disassemble and replace the alternator belt of the BMW R1200 GS motorcycle. First, we put the motorcycl…

How to Check the Coolant Level in a Yamaha Xmax

In the following video, you will learn how to check the coolant level in a 2008 Yamaha Xmax. First, position the motorcycle on a stable surface by raising the stand. Next, lift the cover located at the top of the motorcycle to access the coolant drain bolt. To top up the coolant, unscrew the cap as shown in the video and add the fluid until it reaches the maximum level, indicated as Max. Once finished, close the valve and refit the cover. At this point, start the engine and let it run at idle for a few minutes to eliminate any air bubbles that may have formed inside.

Watch the video!


by ScegliAuto

More videos