Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
  1. Motorcycles
    2. :
  2. Bmw
    3. : Gs1200

Model: Bmw Gs1200
Part: Headlight bulb

To replace the headlight bulb of a BMW GS1200 motorcycle, you will need to follow the steps in the selected video tutorial. If you have used the motorcycle, turn off the engine, remove the key, and let the headlight cool down before starting. Access the back of the headlight, you may need to slightly turn the handlebars; remove the rubber cover protecting the bulb by pulling or rotating it. Disconnect the electrical connector at the base of the bulb by gently pulling it. At this point, press and release the clip that locks the bulb in place and unlock the retaining spring, allowing you to remove the bulb. Once the old bulb is removed, insert the new one and make sure it is properly aligned, reconnect the electrical connector, and replace the protective cover.

Posted on 10 June 2025 by ScegliAuto

Video tutorial

Related tutorials

How to Change the Bulbs in the Headlight of a BMW X6
How to Change the Bulbs in the Headlight of a BMW X6
BMW X6 (2007-2014 / MK 1, E71) How to Change the Bulbs in the Headlight of a BMW X6. Open the hood (pull the lever located at the bottom right of the dashboard) and secure it with …
How to Change the Headlight Bulb on a BMW 1 Series
How to Change the Headlight Bulb on a BMW 1 Series
BMW Serie 1 (2011-2019 / MK 2, F20, F21) To change the headlight bulb on a BMW 1 Series, stop the engine and lift the bonnet, then reach the back of the headlamp unit. Remove the access cove…
Remove Front Headlight Bulb on BMW 3
Remove Front Headlight Bulb on BMW 3
BMW Serie 3 (2005-2013 / E91, E90, E92) Remove the front headlight bulb from a BMW 3? Let's go through the process of removing the damaged bulb. Open the hood and lift it. Locate the headli…

How to Replace the Battery in a Yamaha Vino 125 Scooter?

In this tutorial, you will see how to replace the battery in a Yamaha Vino 125 scooter, a very simple and quick operation. First, ensure that the key is not inserted for safety. Then, lift the rubber mat and, using a simple cross-head screwdriver, unscrew the two screws securing the plastic cover. Once opened, disconnect both terminals, starting with the negative, and remove the battery from its housing. To fit the replacement, simply follow the reverse procedure.

Watch the video!


by ScegliAuto

More videos