Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Change the Bulbs in the Headlight of a BMW X6

Model: BMW X6 MK 1, E71 - Years 2007-2014
Part: Headlight bulb

How to Change the Bulbs in the Headlight of a BMW X6. Open the hood (pull the lever located at the bottom right of the dashboard) and secure it with the prop rod. Locate the plastic inspection cap and remove it (located at the back of the headlight). Disconnect the bulb holder from the headlight and remove the damaged bulb. Install the new bulb (ensure it is the correct type and size) and insert the bulb holder back into the headlight housing. Finally, close the headlight with the rubber inspection cap and test the bulbs for proper operation.

Updated on 12 March 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Change the Headlight Bulb on a BMW X6
How to Change the Headlight Bulb on a BMW X6
BMW X6 (2007-2014 / MK 1, E71) Let's see how to remove the headlight bulb from a BMW X6: open the hood by pulling the lever located at the bottom right of the dashboard, and secure…
How to Replace the Headlight Bulbs on a BMW X6
How to Replace the Headlight Bulbs on a BMW X6
BMW X6 (2007-2014 / MK 1, E71) Want to replace the headlight bulbs on a BMW X6? Let's go through the steps: open the hood by pulling the lever located at the bottom right of the da…
Guide to Replacing the Headlights on the BMW X6 E71
Guide to Replacing the Headlights on the BMW X6 E71
BMW X6 (2007-2014 / MK 1, E71) In this video tutorial, you will learn how to remove and replace the front headlight on the BMW X6 E71, first generation, following the instructions …

Other guides you may be interested in

Where is the Fuel Filter Located in a Volvo XC60?

In this video, you will see where the fuel filter is located in a Volvo XC60 and how to proceed if you need to replace it. As shown, the filter is positioned at the lower part of the engine, right between the left half-shaft and the sway bar attachment. To replace the filter, first, go underneath the vehicle, taking all necessary safety precautions. Then, using an 18mm wrench, open the drain valve and allow any water present to escape. Next, unscrew the housing, remove the old filter, insert the replacement along with a new gasket, and reassemble everything.

Watch the video!


by ScegliAuto

More videos