Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Key Battery of a BMW X6

Model: BMW X6 MK 1, E71 - Years 2007-2014
Part: Key

Start by pressing the button located on the bottom section of the key fob for your BMW X6, then pull out the physical key. Next, unclip the clip that secures the back of the key, then remove it. Once done, you will have access to the dead battery of the key. At this point, remove the battery from its compartment. After removing the battery, you will have completed the disassembly. To install the new battery, simply reverse these instructions, and you will have finished replacing the key battery for your BMW X6.

Updated on 19 April 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Key Fob Battery for the BMW X6 E71
How to Replace the Key Fob Battery for the BMW X6 E71
BMW X6 (2007-2014 / MK 1, E71) This guide shows how to replace the battery in the key fob for the BMW X6 E71. If the vehicle is equipped with a two-sided key fob, first remove the …
How to Replace the Key Battery for the BMW X6
How to Replace the Key Battery for the BMW X6
BMW X6 (2014-2019 / MK 2, F16) If the smart key for your BMW X6 second generation (model years 2014-2019) has suddenly stopped working due to a completely dead battery, don't worry…
How to replace the battery in the remote control of the BMW X6 F16.
How to replace the battery in the remote control of the BMW X6 F16.
BMW X6 (2014-2019 / MK 2, F16) Thanks to the few simple steps described in the following guide, you will be able to independently replace the battery located inside the remote cont…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos