Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How do you replace the rear brake pads of the BMW F850GS?

Model: Bmw F850gs
Part: Brake pads

Video tutorial

It will be possible to replace the rear brake pads of the BMW F850GS by loosening the screws that secure the brake caliper to its housing: once these screws have been loosened, it will be possible to proceed by detaching the caliper from the disc so that it becomes possible to extract the pads from the inside of their respective seat.

Once the old pads have been removed, the new ones can be inserted so that they are properly secured; in this way, the caliper can be reinserted onto the disc to verify that the brake is functioning.


Posted on 18 June 2025 by ScegliAuto


Related tutorials

How to Replace Brake Pads on a BMW F850 GS
How to Replace Brake Pads on a BMW F850 GS
F850gs To replace the brake pads on a BMW F850 GS, you need to perform the same operation for both the front and rear wheels: you will need to undo the bolt…
How to Replace the Engine Oil on a BMW F850GS?
How to Replace the Engine Oil on a BMW F850GS?
F850gs To replace the engine oil on a BMW F850GS, unscrew the Torx 15 screw that secures the oil drain plug. It is advisable to place a container under the …
How to Replace the Chain on the BMW F850
How to Replace the Chain on the BMW F850
F850gs To replace the chain on the BMW F850, first, detach the plastic cover above the sprocket; once this is removed, loosen the nuts securing the rear whe…

How to Change the Engine Oil of a BMW R9T

To change the engine oil of a BMW R9T, follow these steps. Ensure the engine is warm but not too hot. Position the bike on a flat surface and lift the front using a motorcycle stand. Remove the oil cap from the engine oil reservoir. Place a catch container under the oil drain plug, usually located on the underside of the engine. Unscrew the oil drain plug and let the old oil drain completely into the container. Once drained, re-tighten the oil drain plug. Remove the oil filter using an oil filter wrench. Clean the mounting surface of the filter and apply a bit of new oil to the seal of the new filter. Install the new oil filter. At this point, fill the engine with new oil, and you will have completed the replacement.

Watch the video!


by ScegliAuto

More videos