Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
In this tutorial we can see how to reset the service in the BMW R1200 GS, an extremely simple and quick operation, to be carried out only after completing all the scheduled maintenance work. To do this, we will also need the specific device shown in the video, easily available online. First, we remove the indicated cover using the Torx key provided, then we locate the indicated cable and connect the device. We then turn on the ignition, interface the device with the corresponding app to be installed on the smartphone, and select the model from the list. At this point, all that remains is to enter "Instrument Cluster", "Service Reset", and complete the procedure.

Posted on 28 June 2025 by ScegliAuto

Video tutorial

Related tutorials

Disassembly of the front and rear wheel of the BMW R1200GS.
Disassembly of the front and rear wheel of the BMW R1200GS.
R1200 GS Below we will see step by step instructions on how to disassemble and replace the front and rear wheel of the BMW R1200GS motorcycle. First, we put t…
How to disassemble the front headlight of a BMW R1200gs?
How to disassemble the front headlight of a BMW R1200gs?
R1200 GS Good morning, to disassemble the front headlight of our BMW R1200GS, we start by making sure the motorcycle is on a stable surface and the engine is …
How to replace the motor oil in the BMW R1200GS?
How to replace the motor oil in the BMW R1200GS?
R1200 GS In this tutorial we can see how to replace the engine oil in the BMW R1200 GS, an extremely simple and quick operation. First of all, make sure that …

How to Replace the Rear View Mirror on a Honda Forza

To replace the rear view mirror on a Honda Forza, use a screwdriver to lever under the front cover of the fairing to detach it. Underneath, you will find the bolts securing the windscreen and its support: by removing these, you can access the screws holding the rear view mirror. Unscrew these screws and disconnect the connectors attached to the mirrors, allowing you to completely remove them and install the new ones: these must be connected to the connectors, positioned in their place, and secured with the appropriate bolts.

Watch the video!


by ScegliAuto

More videos