Do it yourself
Frequently asked questions about cars and motorcycles
In this guide, we will see step by step instructions on how to reset the maintenance interval (service) of the BMW K1600 motorcycle. First, we put the motorcycle on the stand and start by removing the driver and passenger seats; we remove the cap of the ECU socket to connect our diagnostic tool (with the corresponding adapter), as shown in the video. At this point, we follow the guided procedure to confirm and perform the maintenance light reset; then we verify, on the instrument panel, the actual reset of the service light!

Posted on 29 June 2025 by ScegliAuto

Video tutorial

Related tutorials

K1600 To reset the Service light on the BMW K1600, connect a diagnostic tool to the vehicle's OBD port. This port is located under the seat of the motorcyc…
K1600 In this guide, we will discover how to perform routine maintenance by changing the engine oil and oil filter on the BMW K1600. First, place the bike …
K1600 This guide will illustrate the steps to remove and replace the front wheel and tyre of the BMW K1600, following the instructions below. First, place …

How to Change the Engine Oil in a Royal Enfield 500?

In this tutorial, you will learn how to change the engine oil in a Royal Enfield 500, an extremely simple and quick operation to be performed every 12 months. First, ensure that the engine is cold, then place a container underneath and, using a 10mm socket, unscrew the two bolts related to the drain holes. Once the oil has drained from the system, open the filter cap using the same socket, insert the replacement, and reassemble everything in reverse order. Finally, pour in new 15W50 oil through the upper hole.

Watch the video!


by ScegliAuto

More videos