Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the headlight bulbs on the BMW R NineT?

Model: Bmw Rnine T
Part: Headlight bulb

Video tutorial

In this tutorial, we will see how to replace the headlight bulbs on the BMW R NineT, a very simple and quick operation. First of all, let's make sure that the key is not inserted, so we can work safely.

Then, let's locate the screw on the bottom side of the headlight and unscrew it using a cross-head screwdriver. Next, we separate the headlight from the base, disconnect the power connector, and remove the rubber cap. At this point, all that's left is to unclip the metal clip, remove the old bulb, insert the replacement, and reassemble everything by following the reverse procedure.


Posted on 5 December 2025 by ScegliAuto


Related tutorials

How to change the engine oil in the BMW R NineT?
How to change the engine oil in the BMW R NineT?
Rnine T This tutorial shows how to change the engine oil in the BMW R NineT, a very simple and quick operation. First, wait for the engine to cool down suffi…
How to remove the front headlamp on the BMW Rnine T?
How to remove the front headlamp on the BMW Rnine T?
Rnine T In this tutorial, you will see how to remove the front headlamp on the BMW Rnine T, an extremely simple and quick operation to perform if you need to…
How to adjust the time on the BMW Rnine T
How to adjust the time on the BMW Rnine T
Rnine T Following these brief and simple steps, we will see how to adjust the display on the instrument panel of the BMW Rnine T motorcycle. First, put the m…

How to programme the key for the Peugeot Satelis 125?

To programme the key for the Peugeot Satelis 125, connect the diagnostic tool to the vehicle's OBD port, which is located inside the glove compartment under the steering wheel. Once connected, you can proceed by selecting the corresponding motorcycle model: then follow the instructions provided in the video to ensure the new key is correctly associated. After the procedure is complete, disconnect the scanner and verify that the key functions.

Watch the video!


by ScegliAuto

More videos