Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to remove the front headlamp on the BMW Rnine T?

Model: Bmw Rnine T
Part: Headlight

Video tutorial

In this tutorial, you will see how to remove the front headlamp on the BMW Rnine T, an extremely simple and quick operation to perform if you need to replace the bulb or the entire unit. First, ensure that the key is not inserted, then locate the screw at the lower front area of the headlamp and, using a Torx T20 key, undo it. Next, separate the lamp from the support, disconnect both power connectors, and proceed with replacing the damaged element.

To extract the main bulb, you will first need to remove the large rubber cover.


Updated on 28 July 2026 by ScegliAuto


Related tutorials

How to adjust the time on the BMW Rnine T
How to adjust the time on the BMW Rnine T
Rnine T Following these brief and simple steps, we will see how to adjust the display on the instrument panel of the BMW Rnine T motorcycle. First, put the m…
How to replace the headlight bulbs on the BMW R NineT?
How to replace the headlight bulbs on the BMW R NineT?
Rnine T In this tutorial, we will see how to replace the headlight bulbs on the BMW R NineT, a very simple and quick operation. First of all, let's make sure…
How to change the engine oil in the BMW R NineT?
How to change the engine oil in the BMW R NineT?
Rnine T This tutorial shows how to change the engine oil in the BMW R NineT, a very simple and quick operation. First, wait for the engine to cool down suffi…

How to programme the key for the Peugeot Satelis 125?

To programme the key for the Peugeot Satelis 125, connect the diagnostic tool to the vehicle's OBD port, which is located inside the glove compartment under the steering wheel. Once connected, you can proceed by selecting the corresponding motorcycle model: then follow the instructions provided in the video to ensure the new key is correctly associated. After the procedure is complete, disconnect the scanner and verify that the key functions.

Watch the video!


by ScegliAuto

More videos