Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Model: Bmw Rnine T
Part: Engine oil

This tutorial shows how to change the engine oil in the BMW R NineT, a very simple and quick operation. First, wait for the engine to cool down sufficiently, then remove the lower cover and position a container underneath the bike. Next, locate the drain hole bolt, unscrew it with a Torx T50 key, and let all the oil in the system drain out. At this point, simply unscrew the old filter, tighten both the new filter and the bolt, reassemble everything, and pour the necessary amount of oil through the designated upper hole.

Posted on 2 August 2026 by ScegliAuto

Video tutorial

Related tutorials

How to replace the headlight bulbs on the BMW R NineT?
How to replace the headlight bulbs on the BMW R NineT?
Rnine T In this tutorial, we will see how to replace the headlight bulbs on the BMW R NineT, a very simple and quick operation. First of all, let's make sure…
How to adjust the time on the BMW Rnine T
How to adjust the time on the BMW Rnine T
Rnine T Following these brief and simple steps, we will see how to adjust the display on the instrument panel of the BMW Rnine T motorcycle. First, put the m…
How to remove the front headlamp on the BMW Rnine T?
How to remove the front headlamp on the BMW Rnine T?
Rnine T In this tutorial, you will see how to remove the front headlamp on the BMW Rnine T, an extremely simple and quick operation to perform if you need to…

Replacing the Rear Light on a Harley Davidson Street Glide

In today's tutorial video, we will see how to remove and replace the rear light on a Harley Davidson Street Glide in simple and quick steps. First, place your bike on a stand and move to the rear; then use a socket and spanner to unscrew and remove the nuts found inside the wheel arch, at the height of the rear light, as shown in the video. At this point, disconnect the electrical connector to remove and replace the light with the new one; then reassemble everything, applying the reverse procedure!

Watch the video!


by ScegliAuto

More videos