Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Model: Bmw F800gs
Part: Engine oil

In this tutorial, you will see how to change the engine oil in the BMW F800 GS, a very simple and quick operation. First, ensure that the engine is sufficiently cool, then remove the relevant lower cover and position a container underneath the bike. Next, locate the drain hole bolt, unscrew it using a 24mm socket, let all the oil in the system drain out, and proceed to unscrew the old filter. Now, simply tighten the replacement, reassemble everything, and pour the necessary amount of oil through the designated upper hole.

Posted on 11 May 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Engine Oil and Oil Filter on the BMW F800 GS
How to Replace the Engine Oil and Oil Filter on the BMW F800 GS
F800gs This guide provides instructions on how to perform routine maintenance by replacing the engine oil and oil filter on the BMW F800 GS. First, place yo…
Engine Oil and Oil Filter Replacement on the BMW F800 GS
Engine Oil and Oil Filter Replacement on the BMW F800 GS
F800gs In this video tutorial, you will learn how to replace the engine oil and oil filter while performing the regular maintenance service on a BMW F800 GS…
How to Change the Engine Oil and Oil Filter on a BMW F800 GS
How to Change the Engine Oil and Oil Filter on a BMW F800 GS
F800gs In today’s video, you will see how to perform routine maintenance by changing the engine oil and oil filter on a BMW F800 GS motorcycle. First, posit…

How to Check the Coolant Level in a Yamaha Xmax

In the following video, you will learn how to check the coolant level in a 2008 Yamaha Xmax. First, position the motorcycle on a stable surface by raising the stand. Next, lift the cover located at the top of the motorcycle to access the coolant drain bolt. To top up the coolant, unscrew the cap as shown in the video and add the fluid until it reaches the maximum level, indicated as Max. Once finished, close the valve and refit the cover. At this point, start the engine and let it run at idle for a few minutes to eliminate any air bubbles that may have formed inside.

Watch the video!


by ScegliAuto

More videos