Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
This guide will show you how to remove and replace the starter motor on a BMW R1150 GS motorcycle. First, place the bike on a stand and begin unscrewing the bolts securing the starter motor, disconnecting the electrical wiring. Remove the coil located in front of the starter motor, then remove the starter motor as shown in the video. At this point, carry out the repair or replace the starter motor with a new one, securing it and reconnecting the electrical wiring. Check the engine starts.

Posted on 10 June 2026 by ScegliAuto

Video tutorial

Related tutorials

How to replace the fuel filter on the BMW R1150 GS
How to replace the fuel filter on the BMW R1150 GS
R1150 Gs Today, we will discover the steps to remove and replace the fuel filter on the BMW R1150 GS motorcycle. First, place the bike on a stand and start by…
Replacing the Front Headlight Bulb on BMW R1150 GS
Replacing the Front Headlight Bulb on BMW R1150 GS
R1150 Gs In today's tutorial video, you will see how to remove and replace the front headlight bulb on a BMW R1150 GS. First, remove the bulb protection cap b…
How to replace the battery in the BMW R1150 GS?
How to replace the battery in the BMW R1150 GS?
R1150 Gs As we can see in this tutorial, replacing the battery in the BMW R1150 GS is an extremely simple and quick operation. First of all, make sure that th…

Changing the Oil and Filter on the Kawasaki Versys

Here’s how to change the oil and filter on the Kawasaki Versys. Warm up the engine for a few minutes, place the motorcycle on the centre stand, open the filler cap, and remove the drain plug underneath the engine. Place a catch basin under the oil sump, unscrew the drain plug, and let the oil drain out. Unscrew the oil filter and let all the old oil drain out. Install a new filter and tighten it with the appropriate tool. Pour half a glass of new oil into the filler cap and wait for it to flow out of the drain hole, after which replace the plug. Fill with approximately 1.8 litres of new oil, take it for a short ride to circulate the oil in the engine, stop the engine, and check the level through the designated window. Top up if necessary.

Watch the video!


by ScegliAuto

More videos