Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
To replace the oil seal of the final drive on a BMW R1200GS, you first need to remove the rear mudguard. At this point, engage first gear and remove the rear wheel, as shown in the video, and then remove the brake caliper. Now you can remove the plug that holds the oil in the final drive and the other plug shown in the video to drain the oil completely. Next, you can remove the cover of the bevel gear assembly, under which there will be a metal ring and a gasket that need to be replaced. Once the replacement is done, you can reassemble all the previously removed parts.

Updated on 19 April 2026 by ScegliAuto

Video tutorial

Related tutorials

Fitting the Leg Cover on the BMW R1200GS/Adventure
Fitting the Leg Cover on the BMW R1200GS/Adventure
R1200gsa As with any maintenance operation on a motorcycle, place your BMW R1200GSA on a stand on a flat surface to ensure the operator's safety. Once done, t…
How to Replace the Battery on a BMW R1200 GSA
How to Replace the Battery on a BMW R1200 GSA
R1200gsa In this video tutorial, learn how to remove and replace the battery on a BMW R 1200 GSA, as well as the R 1200 GS. First, place your bike on the stan…
How to Replace the Key Battery of the BMW R1200 GSA
How to Replace the Key Battery of the BMW R1200 GSA
R1200gsa If your BMW R1200 GSA key has suddenly stopped working, do not rush to buy a new one as the solution may be much simpler and cheaper. Below, discover…

How to Replace the Battery in a Yamaha Vino 125 Scooter?

In this tutorial, you will see how to replace the battery in a Yamaha Vino 125 scooter, a very simple and quick operation. First, ensure that the key is not inserted for safety. Then, lift the rubber mat and, using a simple cross-head screwdriver, unscrew the two screws securing the plastic cover. Once opened, disconnect both terminals, starting with the negative, and remove the battery from its housing. To fit the replacement, simply follow the reverse procedure.

Watch the video!


by ScegliAuto

More videos