Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Fitting the Leg Cover on the BMW R1200GS/Adventure

Model: Bmw R1200gsa
Part:

Video tutorial

As with any maintenance operation on a motorcycle, place your BMW R1200GSA on a stand on a flat surface to ensure the operator's safety. Once done, take the leg cover and, after positioning it over the seat of the bike, secure it to the motorcycle using the appropriate straps around the handlebars at the front.

On the sides, attach the straps to the frame, aligning them with the pedal and the specific stop, placed at a medium distance between the seat and the pedal. This way, the leg cover is fitted and ready for use.


Updated on 26 April 2026 by ScegliAuto


Related tutorials

How to Replace the Oil Seal of the Final Drive on a BMW R1200GS?
How to Replace the Oil Seal of the Final Drive on a BMW R1200GS?
R1200gsa To replace the oil seal of the final drive on a BMW R1200GS, you first need to remove the rear mudguard. At this point, engage first gear and remove …
Battery Replacement BMW R1200GSA
Battery Replacement BMW R1200GSA
R1200gsa Descriptive guide for replacing the battery on a BMW R1200GSA. Obtain a new battery. Place the motorcycle on the centre stand. Using a 3mm Allen key,…
How to Replace the Key Battery of the BMW R1200 GSA
How to Replace the Key Battery of the BMW R1200 GSA
R1200gsa If your BMW R1200 GSA key has suddenly stopped working, do not rush to buy a new one as the solution may be much simpler and cheaper. Below, discover…

How to change the transmission oil on the Honda PCX 150 scooter?

In this tutorial, you will see how to change the transmission oil on the Honda PCX 150 scooter, a very simple and quick operation. First, ensure the engine is completely cold, then locate the three bolts at the end of the casing and position a container underneath them. Next, remove the two inner bolts using a 12 mm socket, clean them of any dirt, and allow all the oil in the system to drain out. At this point, tighten the lower bolt and, using a pump or syringe, add new oil through the upper hole.

Watch the video!


by ScegliAuto

More videos