Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Model: Bmw R1200 Rt
Part: Light bulb

In this video tutorial, you will learn how to remove and replace the front indicator bulb on the BMW R1200 RT in simple and quick steps. First, fold the mirror outward to access the screw inside; then remove the entire plastic cover along with the indicator housing, as shown in the video. At this point, disconnect the electrical connector and remove the bulb, replacing it with the new one (of the correct type); then reassemble everything by following the reverse procedure!

Updated on 9 May 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Indicator Bulb on the BMW R1200 RT
How to Replace the Indicator Bulb on the BMW R1200 RT
R1200 Rt Let’s see how to replace the indicator bulb on the BMW R1200RT: you need to move the mirror glass of the side mirrors downwards to access the top wit…
How to Replace the Front Indicator Bulbs on the BMW R1200 RT
How to Replace the Front Indicator Bulbs on the BMW R1200 RT
R1200 Rt In today's video, you will see the steps to remove and replace the front indicator bulbs on a BMW R1200 RT motorcycle. To access the indicator bulb, …
Replacing the Headlight Bulb on the BMW R1200 RT
Replacing the Headlight Bulb on the BMW R1200 RT
R1200 Rt In this brief and simple guide, learn how to remove and replace the headlight bulb on the BMW R1200 RT motorcycle. First, place your motorcycle on th…

How to Check the Coolant Level in a Yamaha Xmax

In the following video, you will learn how to check the coolant level in a 2008 Yamaha Xmax. First, position the motorcycle on a stable surface by raising the stand. Next, lift the cover located at the top of the motorcycle to access the coolant drain bolt. To top up the coolant, unscrew the cap as shown in the video and add the fluid until it reaches the maximum level, indicated as Max. Once finished, close the valve and refit the cover. At this point, start the engine and let it run at idle for a few minutes to eliminate any air bubbles that may have formed inside.

Watch the video!


by ScegliAuto

More videos