Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Change the Position Bulb on a BMW R1200RT Motorcycle?

Model: Bmw R1200rt
Part: Light bulb

Video tutorial

To change the position bulb on a BMW R1200RT motorcycle, first remove the side mirror, which is held in place by a clip mechanism. Next, remove the three screws shown in the video, being careful to hold the plastic to prevent it from falling and chipping.

Now you have access to the bulb: insert your hand and locate the L-shaped bulb holder. Rotate the tab counterclockwise and pull out the holder with the bulb.

Disconnect the old bulb and replace it with a new one. Reassemble everything by retracing the previous steps in reverse.


Updated on 21 May 2026 by ScegliAuto


Related tutorials

How to Replace the Battery in the BMW R1200 RT?
How to Replace the Battery in the BMW R1200 RT?
R1200rt In this guide, you will find instructions on how to remove and replace the battery in the BMW R1200 RT motorcycle. First, place the bike on its stand…
Removing the Rear View Mirror of the BMW R1200 RT
Removing the Rear View Mirror of the BMW R1200 RT
R1200rt This guide shows you how to remove and replace the rear view mirror of the BMW R1200 RT motorbike in simple, quick steps. First, place the bike on a …
How to change the engine oil of a BMW R1200T?
How to change the engine oil of a BMW R1200T?
R1200rt To change the motor oil of a BMW R1200T, follow these steps. Make sure the motorcycle is on a flat surface and that the engine is warm but not too ho…

How to Replace the Front Brake Pads on an Aprilia RSV 1000?

To replace the front brake pads on an Aprilia RSV 1000, loosen the screws securing the brake caliper to the disc. Once the caliper is freed, remove the pin that holds the pads and slide them out of their housing. After removing the old pads, insert the new ones into the caliper, securing them with the appropriate pin. Once secured, reposition the caliper onto the disc and fasten it properly.

Watch the video!


by ScegliAuto

More videos