Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Model: Triumph T120
Part: Engine oil

To change the oil in a Triumph T120 motorcycle, make sure the bike is positioned on a stable and flat surface. It is helpful to let the engine warm up for a few minutes, so the old oil becomes more fluid and flows better. Turn off the engine and locate the oil drain plug, located under the engine block. Place a suitable container to collect the used oil, then carefully unscrew the plug, allowing the oil to completely drain from the engine. Once finished, clean the plug and drain point well to remove any residue. Tighten the drain plug securely and proceed to fill the engine with new oil of the specific type recommended by Triumph. Check the level with the dipstick or gauge, making sure it is within the indicated range. Start the engine for a few seconds, then turn it off and recheck the level, adjusting if necessary.

Posted on 10 November 2024 by ScegliAuto

Video tutorial

Related tutorials

How to change the battery on a Triumph Bonneville T120.
How to change the battery on a Triumph Bonneville T120.
T120 Let's see how to change the battery on a Triumph T120: first, we need to remove the seat, which is quite simple. We insert the key into the lock loca…
How to change the battery of a Triumph Bonneville T120
How to change the battery of a Triumph Bonneville T120
T120 In this video we can see how to change the battery of a Triumph Bonneville T120: the battery is typically located under the seat, which does not lift…

How to Replace the Rear View Mirror on a Honda Forza

To replace the rear view mirror on a Honda Forza, use a screwdriver to lever under the front cover of the fairing to detach it. Underneath, you will find the bolts securing the windscreen and its support: by removing these, you can access the screws holding the rear view mirror. Unscrew these screws and disconnect the connectors attached to the mirrors, allowing you to completely remove them and install the new ones: these must be connected to the connectors, positioned in their place, and secured with the appropriate bolts.

Watch the video!


by ScegliAuto

More videos