Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the LCD Display on the Ducati Monster 696 Instrument Cluster

Model: Ducati Monster 696
Part: Instrument cluster

Video tutorial

This guide provides instructions for removing and replacing the LCD display on the Ducati Monster 696 instrument cluster. First, remove the display from the instrument cluster by disconnecting the electrical connector found at the back; then unscrew the fixing screws located at the back using a Torx screwdriver, as shown in the video.

Next, unscrew the screws of the LCD screen to remove it, disconnecting the two connectors at the back; then reassemble everything by following the reverse procedure!


Updated on 1 August 2026 by ScegliAuto


Related tutorials

How to Replace the Exhaust on the Ducati Monster 696?
How to Replace the Exhaust on the Ducati Monster 696?
Monster 696 To replace the exhaust on the Ducati Monster 696, loosen the screws that secure the exhaust tip to its supports: these screws are located on the righ…
How to Replace the Battery of the Ducati Monster 696
How to Replace the Battery of the Ducati Monster 696
Monster 696 Today we will discover the instructions that will allow us to disassemble and replace the battery of the Ducati Monster 696 motorcycle in simple step…
How to Replace the Rear Mudguard on the Ducati Monster 696?
How to Replace the Rear Mudguard on the Ducati Monster 696?
Monster 696 In this tutorial, see how to replace the rear mudguard on the Ducati Monster 696, a very simple and quick operation. First, remove the seat, then tem…

How to Clean the Carburettor on an LML Star?

To clean the carburettor on an LML Star, you first need to remove this part from its housing: to disassemble the carburettor, you must remove the right side panel of the scooter, near the rear wheel. Once this panel is removed, you will locate the carburettor underneath by unscrewing the appropriate fixing screws. Then, disconnect the fuel lines and completely remove the carburettor: you can now clean it with a blast of compressed air, then refit all the removed components.

Watch the video!


by ScegliAuto

More videos