Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Spark Plugs on a BMW F650 GS

Model: Bmw F650 Gs
Part: Spark plugs

Video tutorial

In this video tutorial, we will go through the main steps to remove and replace the spark plugs on the engine of a BMW F650 GS motorcycle. First, place the bike on its centre stand and begin by removing the seat and fuel tank, unscrewing the securing screws and disconnecting the electrical harnesses.

Then, disconnect the spark plug caps and use a socket wrench with an extension to unscrew and remove the spark plugs, as shown in the video. Now, replace the old spark plugs with new ones of the same thread size, screwing them in by hand before tightening with a wrench!


Updated on 20 June 2026 by ScegliAuto


Related tutorials

How to Replace the Battery on a BMW F650 GS?
How to Replace the Battery on a BMW F650 GS?
F650 Gs In this tutorial, you will see how to replace the battery on a BMW F650 GS, a very simple and quick operation. First, ensure that the key is not inse…
How to replace the headlamp bulb in the BMW F650 GS?
How to replace the headlamp bulb in the BMW F650 GS?
F650 Gs In this tutorial, you will see how to replace the headlamp bulb in the BMW F650 GS, a very simple and quick operation. First, ensure the key is not i…
How do you replace the engine oil of the BMW F650 GS?
How do you replace the engine oil of the BMW F650 GS?
F650 Gs The oil replacement of the BMW F650 GS can be carried out by loosening the drain plug of the oil pan, located in the central lower part of the vehicl…

How to Replace the Rear Brake Pads on a Benelli TRK 502X?

To replace the rear brake pads on a Benelli TRK 502X, loosen the screws that secure the corresponding caliper so that it can be detached from the brake disc: once the caliper is removed from its disc, you can proceed to detach it and remove the pin that secures the pads inside the caliper. At this point, you can remove the old pads from their seat to insert the new ones: these must be secured properly by positioning the caliper and checking that the brake is functioning.

Watch the video!


by ScegliAuto

More videos