Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Motorcycles
    2. :
  2. Bmw
    3. :
  3. R1200 GS
    4. : How to replace the air filter of the BMW R1200GS

Model: Bmw R1200 GS
Part: Air filter
How to replace the air filter of the BMW R1200GS

Below we will see the main steps that will allow us to disassemble and replace the air filter of the engine of the BMW R1200 GS motorcycle. First, we put the motorcycle on the center stand and start by removing the rider's seat; then we unscrew the screws of the side plastic cover and the cover of the air filter box, as shown in the video. At this point, we remove the air filter cartridge that we find inside, replacing it with the new one; we insert the new filter in the correct direction and reassemble everything, applying the reverse process!


Posted on 8 October 2023 by ScegliAuto



How to replace the motor oil in the BMW R 1200 GS?
R1200 GS In this tutorial we can see how to replace the engine oil in the BMW R1200 GS, an extremely simple and quick operation. First of all, we wait for the
How do you replace the buttons on the left handlebar of the BMW R 1200 GS?
R1200 GS In order to replace the buttons located at the base of the left handlebar on the BMW R1200 GS, you need to pry them off with an object so that they c
How to replace the rearview mirrors on the BMW R 1200 GS?
R1200 GS In this tutorial we can see how to replace the rearview mirrors on the BMW R1200 GS, an extremely simple and quick operation. First of all, position

How to replace the starter motor on the Ktm XC 250

In this video tutorial we will see the instructions on how to disassemble and replace the starter motor of the Ktm XC 250 two-stroke enduro motorcycle. First of all we go to remove the plastic cover that we find on the left of the engine, unscrewing all the screws, in order to access the starter motor; then we are going to unscrew the additional screws of the starter motor, disconnecting the electrical connector to remove it and replace it with the new one, as shown in the video. At this point we are going to install the new starter motor, applying the reverse procedure of the disassembly!

Watch the video!


by ScegliAuto

More videos