Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Model: Bmw F800gs
Part: Spark plugs

This guide provides useful instructions for removing and replacing the engine spark plugs on the BMW F800 GS enduro motorcycle. First, place the motorcycle on its centre stand and remove the rider's seat; then unscrew the screws securing the fuel tank, disconnecting the fuel line and the electrical connector located underneath, as shown in the video. At this point, disconnect the spark plug connectors and use a socket wrench with an extension to unscrew and remove the two spark plugs; then install the new ones, screwing them in by hand and tightening gently with the wrench.

Updated on 5 September 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Change the Spark Plugs on a BMW F800 GS
How to Change the Spark Plugs on a BMW F800 GS
F800gs Today, you will see the instructions for removing and replacing the engine spark plugs on a BMW F800 GS in simple steps. Position the motorcycle on t…
How to Replace the Front Tyre on the BMW F800 GS
How to Replace the Front Tyre on the BMW F800 GS
F800gs Briefly follow the main instructions to remove and replace the front wheel and tyre of the BMW F800 GS motorbike in simple steps. First, place your b…
How to Replace the Stator on a BMW F800 GS
How to Replace the Stator on a BMW F800 GS
F800gs This guide provides instructions on how to remove and replace the stator on a BMW F800 GS, following the steps outlined below. First, place your moto…

How to Replace the Rear View Mirror on a Honda Forza

To replace the rear view mirror on a Honda Forza, use a screwdriver to lever under the front cover of the fairing to detach it. Underneath, you will find the bolts securing the windscreen and its support: by removing these, you can access the screws holding the rear view mirror. Unscrew these screws and disconnect the connectors attached to the mirrors, allowing you to completely remove them and install the new ones: these must be connected to the connectors, positioned in their place, and secured with the appropriate bolts.

Watch the video!


by ScegliAuto

More videos