|
Do it yourself
| |||
| ||||
Model: Bmw F800gs
Today's guide will show you the steps to drain and replace the brake fluid on the BMW F800 GS motorcycle. First, place your bike on the centre stand and start bleeding the brake fluid from the caliper by connecting a hose and squeezing the front brake lever to drain it; then remove any excess brake fluid from the reservoir, as shown in the video. At this point, close the valve on the caliper and top up with new brake fluid, filling it to the maximum mark.
Updated on 31 July 2026 by ScegliAuto
Video tutorial
Related tutorials
F800gs
Today's guide will show you how to remove and replace the fuel pump on the BMW F800 GS, following these simple steps. First, place the motorcycle on …
F800gs
In this short video, you will see how to bleed and replace the coolant or antifreeze on a BMW F800 GS motorcycle. To bleed the cooling system, remove…
F800gs
In today's video tutorial, learn how to remove and replace the fuel pump of the BMW F800 GS, following the instructions below. First, remove the ride…
|
How to Replace the Battery in a Yamaha Vino 125 Scooter?
In this tutorial, you will see how to replace the battery in a Yamaha Vino 125 scooter, a very simple and quick operation. First, ensure that the key is not inserted for safety. Then, lift the rubber mat and, using a simple cross-head screwdriver, unscrew the two screws securing the plastic cover. Once opened, disconnect both terminals, starting with the negative, and remove the battery from its housing. To fit the replacement, simply follow the reverse procedure. by ScegliAuto More videos
|
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.005
(c) ScegliAuto 2026 - info@scegliauto.com - Privacy policy VAT number: IT01247470535 |
