Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Front Brake Pads on a BMW R1200 GS

Model: Bmw R1200gs
Part: Brake pads

Video tutorial

Today's instructions will show you how to remove and replace the front brake pads on a BMW R1200 GS motorcycle. First, place your motorcycle on a stand and start unscrewing the fixing bolts of the front brake caliper to remove it from the disc.

Then, apply pressure to the caliper piston to retract it, allowing you to remove the old brake pads as shown in the video. At this point, clean the caliper of any residual dirt, and install the new original brake pads.

Finally, refit the brake caliper onto the disc, securing it properly.


Updated on 17 September 2026 by ScegliAuto


Related tutorials

Replacing the Front Brake Pads on BMW R1200 GS
Replacing the Front Brake Pads on BMW R1200 GS
R1200gs First, use fine pliers to remove the pin from the brake pad pin, as shown in the video. Once the pin is removed, the metal clip will also come out, t…
How to Replace the Rear Brake Pads of the BMW R1200 GS?
How to Replace the Rear Brake Pads of the BMW R1200 GS?
R1200gs Before you can remove the rear brake pads of the BMW R1200 GS, you must unscrew the bolts securing the rear wheel. Once the wheel is removed, you can…
Removing the Front Wheel of a BMW R1200 GS
Removing the Front Wheel of a BMW R1200 GS
R1200gs This brief guide explains how to remove the front wheel of a BMW R1200 GS in simple, quick steps. First, lift the motorcycle using the front stand an…

How to Replace the Piston on a Derbi GPR 125

To replace the piston on a Derbi GPR 125, loosen the bolts securing the cylinder head to its housing, allowing it to be removed along with the valve cover. This will enable you to access the bolts securing the cylinder at the top of the engine, allowing for its complete removal and revealing the underlying piston. The piston can now be freed from its securing bolts, enabling you to position the new piston onto the corresponding conrod. After installation, refit the engine components.

Watch the video!


by ScegliAuto

More videos