|
Do it yourself
| |||
| ||||
Model: Bmw R1200gs
Before you can remove the rear brake pads of the BMW R1200 GS, you must unscrew the bolts securing the rear wheel. Once the wheel is removed, you can access the brake caliper, which needs to be detached from the brake disc by removing the appropriate pins. After these have been removed, slide the pads out from inside the caliper and replace them with new ones. After replacement, reattach the caliper to the disc with the appropriate pins and secure the rear wheel with its bolts.
Updated on 3 May 2026 by ScegliAuto
Video tutorial
Related tutorials
R1200gs
Today's instructions will show you how to remove and replace the front brake pads on a BMW R1200 GS motorcycle. First, place your motorcycle on a sta…
R1200gs
Today, you will learn the steps needed to remove the rear wheel on a BMW R1200 GS motorcycle. First, lift the motorcycle with a jack to raise the rea…
R1200gs
In this tutorial video, you will learn how to remove and replace the rear wheel and tyre of the BMW R1200 GS motorcycle, following the instructions b…
|
How to Remove the Engine from a KTM EXC 300?
To remove the engine from the KTM EXC 300, you need to take out the engine block from its housing by unscrewing the bolts that secure it to the supports. Once the engine block is removed, unscrew the bolts that secure the cylinder at the top, then proceed to remove the side casings. Underneath, you will find the piston and other internal components, such as the clutch. The necessary parts can now be replaced, and you can subsequently reassemble all the components that were removed earlier. by ScegliAuto More videos
|
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.653
(c) ScegliAuto 2026 - info@scegliauto.com - Privacy policy VAT number: IT01247470535 |
