Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to reset the service light on the BMW R1200 GS?

Model: Bmw R1200gs
Part: Service warning light

Video tutorial

Resetting the service light on the BMW R1200 GS, as shown in this tutorial, is an extremely simple and quick operation. To do this, you will need the scanner shown in the video, which can be easily found online.

Start by connecting it to the OBD port, accessible from the battery compartment, then turn on the instrument cluster and interface the application with the ECU. Next, select the correct model from the list, go to "Instrument cluster" and enter "Service Reset". At this point, perform the reset using the appropriate options and restart the instrument cluster.


Updated on 19 September 2026 by ScegliAuto


Related tutorials

How to Reset the "Service" Light on a BMW R1200 GS
How to Reset the "Service" Light on a BMW R1200 GS
R1200gs Before you begin, position your BMW R1200 GS on its side stand. Start by connecting the OBD reader to the bike's port. Next, open the "MOTO SCAN" app…
Reset Service Light on BMW R1200 GS
Reset Service Light on BMW R1200 GS
R1200gs Today, you will learn how to reset the service light for the routine maintenance oil change on a BMW R1200 GS. First, obtain the OBD diagnostic tool …
How to reset the service on the BMW R1200 GS?
How to reset the service on the BMW R1200 GS?
R1200gs This tutorial shows how to reset the service on the BMW R1200 GS, a very simple and quick operation to perform only after completing all required sch…

Vespa Immobiliser: How to Transfer the Chip from the Old Key

In the case shown in the video, the new keys are not recognised by the ECU: the Vespa starts but does not run (thus the immobiliser is active). The solution shown in the video involves locating the immobiliser chip in the old key (the one recognised by the ECU). Open the cover on the key (only red master keys or some blue ones), remove the chip (which is a small black cylinder or rectangle), insert it into the new key in place of the new one, and try to start. Now the key will work. If the master key is red, it will definitely work. If it is blue, it might work: you need to cut the silicone; this is possible but a delicate operation. If it is a black clone key, then it is a system that does not work.

Watch the video!


by ScegliAuto

More videos