Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the camshaft sensors of the BMW Z4

Model: BMW Z4 E89 - Years 2009-2016
Part: Crankshaft position sensor

In this video we see how to replace the camshaft sensors on a BMW Z4; these sensors are one for intake and one for exhaust. How can we understand that they need to be replaced? From the fact that if we try to start the car, it takes a while to start, because the ECU does not perceive the position of the camshaft. Changing them is not difficult, we have to remove the filter box, the CB Valve duct, and behind we find the intake side sensor, while underneath on the other side there is the exhaust side sensor. It is just a matter of disconnecting two connectors and removing a 4-pin clip; at that point you just need to pull it out and put the new one back in.

Posted on 10 November 2024 by ScegliAuto

Video tutorial

Related tutorials

How to Program TPMS Sensors on a BMW Z4
How to Program TPMS Sensors on a BMW Z4
BMW Z4 (2009-2016 / E89) Today, you will learn how to program the tire pressure monitoring system (TPMS) sensors on a BMW Z4. The first step is to replace the sensors. Remove…
How to replace the cabin filter in the BMW Z4?
How to replace the cabin filter in the BMW Z4?
BMW Z4 (2009-2016 / E89) In this tutorial, we can see how to replace the cabin filter in the BMW Z4, a very simple and quick operation. First of all, go to the passenger side…
How to Replace the BMW Z4 Remote Battery?
How to Replace the BMW Z4 Remote Battery?
BMW Z4 (2002-2008 / E85, E86) In this tutorial, you will see how to replace the battery in the BMW Z4 remote, a very simple and quick operation. For this, you will need a small fl…

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos