Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Program TPMS Sensors on a BMW Z4

Model: BMW Z4 E89 - Years 2009-2016
Part:

Today, you will learn how to program the tire pressure monitoring system (TPMS) sensors on a BMW Z4. The first step is to replace the sensors. Remove the tires to access the sensors and install the new ones; the model we will use is the TS01, compatible with FCC CE universal certification at 433 and 315 MHz. In addition to using the new sensors, you will also need a diagnostic tool for the sensors. The model we will use is the TPMS80. Install the new sensors between the tire and the rim, connecting them to the valve. Next, turn on the diagnostic tool and enter your vehicle's data. Step away from the car and position the tool next to each sensor. By doing this, the vehicle will recognize the sensor activation and emit a beep. This process must be performed on all four tires.

Posted on 18 August 2026 by ScegliAuto

Video tutorial

Related tutorials

How to replace the camshaft sensors of the BMW Z4
How to replace the camshaft sensors of the BMW Z4
BMW Z4 (2009-2016 / E89) In this video we see how to replace the camshaft sensors on a BMW Z4; these sensors are one for intake and one for exhaust. How can we understand tha…
How do you duplicate a BMW Z4 key?
How do you duplicate a BMW Z4 key?
BMW Z4 (2019-2026 / G29) Duplicating the key of a BMW Z4 is not a simple operation like copying any key. It is necessary to have a compatible blank key, machinery to carve th…
Where is the Fuse Box on a BMW Z4 E89?
Where is the Fuse Box on a BMW Z4 E89?
BMW Z4 (2009-2016 / E89) If you own a BMW Z4 E89 and want to find its fuse box, follow the steps described below. First, reach the front passenger seat and focus on the botto…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos