Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. BMW
    3. :
  3. Serie 5
    4. : Blocked wheel removal instructions

BMW Serie 5 - Video tutorial

Model: BMW Serie 5 E39 - Years 1995-2003
Part: Tires
Operation: Blocked wheel removal instructions

If the rear wheel has to be removed, loosen the fixing pins without unscrewing them completely before lifting the car; then lift the car by placing it on suitable car stands, complete the disassembly of the pins and the removal of the wheel; it could happen that the rim is blocked on the hub due to the formation of oxide, for this reason it is suggested to spray the release spray right in correspondence with the hub seat, let it act and then unlock the wheel with transversal movements; for this reason, when the wheel has to be installed, it is advisable to brush the seat of the hub and apply grease to prevent the formation of oxide.


Posted on 25 August 2023 by ScegliAuto



How to open the blocked fuel flap of the BMW 5 Series
BMW Serie 5 (2017-2024 / G30) These brief steps will show us how to open the fuel filler flap of the BMW 5 Series in case of emergency, following the instructions below. This oper
Door panel removal instructions
BMW Serie 5 (2003-2010 / E61, E60) The disassembly of the door panel is very simple to carry out and requires the removal of only two fixing screws: one is located under the plastic ca
Front bumper removal instructions
BMW Serie 5 (1995-2003 / E39) In order to remove the front bumper, it is advisable to lift the car and remove the front wheels to have more room for maneuver when removing the scr

Disassembly of the gear knob on the Lancia Ypsilon 2

Today we will see, in this video tutorial, how to remove and replace the gear knob on the second series Lancia Ypsilon, but also on the Lancia Musa, in simple and quick steps. We get inside the car and start by removing the old gear knob; to do this, just unscrew it anticlockwise, as shown in the video. At this point we also remove the gearshift gaiter, in order to replace, if necessary, it too; we just have to fix the new headset and insert the new gear knob, screwing it correctly and without creating play on the gear lever!

Watch the video!


by ScegliAuto

More videos