Do it yourself
Frequently asked questions about cars and motorcycles

How do you deactivate the Start and Stop function in the BMW 2 Series?

Model: BMW Serie 2 F45 - Years: 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021
Part: Checks and maintenance

See other generations:
Video tutorial

Regarding the Start and Stop system of the BMW 2 Series, deactivating and activating it does not involve any complicated use of controls or procedures, everything is easily manageable with a single dedicated button. The video tutorial here shows how the above is done, that is, you must press the button labeled Off, located next to the Start/Stop button and installed on the right side of the instrument panel.

When the LED of the button is off, the Start and Stop is deactivated, while when it is on, it means that we have activated it. All this must be done with the instrument panel on.


Posted on 30 May 2025 by ScegliAuto


Related tutorials

BMW Serie 2 (2013-2021 / F22) In this tutorial, you will see how to disable the passenger airbag in the BMW 2 Series, a very simple and quick operation that must be done after pla…
BMW Serie 2 (2014-2021 / F45) Before resetting the service light, perform maintenance on your vehicle (change the engine oil and filters). Then, get in your car and press the igni…
BMW Serie 2 (2014-2021 / F45) The instructions in this guide will show us how to disassemble and replace the bulbs of the rear headlight of the BMW 2 Series. First, we open the re…

How to enter the radio code in the Opel Zafira?

In the Opel Zafira, it may happen that the radio locks and consequently requests the appropriate security code, especially after disconnecting or replacing the battery. The code can be found in the documents provided at purchase or through one of the various online recovery services. Once obtained, enter it by following the procedure shown in this tutorial. First, switch on the instrument panel, then press and hold both the "AS" button and the left knob for about 5 seconds. Next, enter the first digit by repeatedly pressing the "1" button, continue with the next 3 buttons, and save the setting by pressing the "AS" button again.

Watch the video!


by ScegliAuto

More videos