Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the rear lights of the BMW 2 Series

Model: BMW Serie 2 F45 - Years 2014-2021
Part: Tail light bulb

The instructions in this guide will show us how to disassemble and replace the bulbs of the rear headlight of the BMW 2 Series. First, we open the rear hatch of the trunk and start unscrewing the screws of the rear light, disconnecting the electrical connector of the bulbs to remove it; then we separate the bulb holder from the light fixture, thus accessing all the bulbs of the rear headlight, as shown in the video. At this point, we replace any faulty bulbs with new ones, of the right type and with the same attachment; we test the operation of the brake lights.

Posted on 14 May 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Remove the Rear Headlight of the BMW 2 Series?
BMW Serie 2 (2019-2026 / F44) In the BMW 2 Series, the rear headlight is held in place by a clip system and a single screw. Its removal is quite simple. To access the screw, first…
How to disassemble the rear headlight of the BMW 2 Series
How to disassemble the rear headlight of the BMW 2 Series
BMW Serie 2 (2013-2021 / F22) In this guide, we will see the disassembly and replacement instructions for the rear taillight and its bulbs of the BMW 2 Series. First, we open the …
How to Replace the Rear Headlight Bulb on a BMW 2 Series?
How to Replace the Rear Headlight Bulb on a BMW 2 Series?
BMW Serie 2 (2014-2021 / F45) To replace the rear headlight bulb on a BMW 2 Series, open the trunk to access the top of the headlight. There will be a small cover that needs to be…

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos