Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to disassemble the rear headlight of the BMW 2 Series

Model: BMW Serie 2 F22 - Years 2013-2021
Part: Tail light

In this guide, we will see the disassembly and replacement instructions for the rear taillight and its bulbs of the BMW 2 Series. First, we open the rear trunk door and start by removing the plastic caps located on the taillights; then we unscrew the screws found inside, disconnecting the electrical connector of the bulbs to remove the rear light, as shown in the video. At this point, we separate the bulb holder from the light fixture, replacing the bulbs or the entire taillight; we perform the opposite procedure to reassemble the rear light!

Posted on 19 January 2025 by ScegliAuto

Video tutorial

Related tutorials

How to replace the rear lights of the BMW 2 Series
How to replace the rear lights of the BMW 2 Series
BMW Serie 2 (2014-2021 / F45) The instructions in this guide will show us how to disassemble and replace the bulbs of the rear headlight of the BMW 2 Series. First, we open the re…
How to Remove the Rear Headlight of the BMW 2 Series?
BMW Serie 2 (2019-2026 / F44) In the BMW 2 Series, the rear headlight is held in place by a clip system and a single screw. Its removal is quite simple. To access the screw, first…
How do you disassemble the rear lights of the BMW 2 Series?
How do you disassemble the rear lights of the BMW 2 Series?
BMW Serie 2 (2013-2021 / F22) Eventually, there may arise the need to disassemble the rear light of your BMW Series 2, whether it be for cleaning the headlight, updating the bulbs…

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos