Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Rear Headlight of the BMW 2 Series?

Model: BMW Serie 2 F44 - Years 2019-2026
Part: Tail light

In the BMW 2 Series, the rear headlight is held in place by a clip system and a single screw. Its removal is quite simple. To access the screw, first open the hood, then remove the small protective panel located next to the headlight. Once removed, you can see the screw and proceed to unscrew it with a standard Phillips screwdriver. After that, pull the headlight towards the rear of the car to disengage it from the clip system, and finally, disconnect the electrical connector. Now you can proceed to replace the bulbs or the entire headlight.

Posted on 12 February 2026 by ScegliAuto

This video is currently unavailable

Related tutorials

How to disassemble and replace the battery of the BMW 2 Series 228i.
How to disassemble and replace the battery of the BMW 2 Series 228i.
BMW Serie 2 (2019-2026 / F44) The information provided in this guide will show us how to disassemble and replace the battery of the BMW Series 2 228i. First, we open the hood of t…
How to disassemble the rear headlight of the BMW 2 Series
How to disassemble the rear headlight of the BMW 2 Series
BMW Serie 2 (2013-2021 / F22) In this guide, we will see the disassembly and replacement instructions for the rear taillight and its bulbs of the BMW 2 Series. First, we open the …
Replacement of the rear brake pads of the BMW 2 Series
Replacement of the rear brake pads of the BMW 2 Series
BMW Serie 2 (2014-2021 / F45) Today's step-by-step instructions will show us the process of disassembling and replacing the rear brake pads of the BMW 2 Series. First, we lift the…

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos