Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How do you replace the front turn signal bulb in the BMW E46?

Model: BMW Serie 3 E46 - Years 1998-2006
Part: Headlight bulb

The turn signal bulb of a car, also known as a blinker, is among the DIY jobs that can be done in a very short time and without any difficulty if it is burnt out and needs to be replaced, as the video tutorial here proves. Let's proceed as described below: Open the hood, locate the hole above the aforementioned indicator, in which the cross screw to be removed is present, then unscrew it with a screwdriver, allowing us to remove the turn signal from its seat. The last step is to remove the bulb holder, replace the bulb, and reassemble everything.

Posted on 6 August 2025 by ScegliAuto

Video tutorial

Related tutorials

Replacing the Front Turn Signal Bulb
Replacing the Front Turn Signal Bulb
BMW Serie 3 (1998-2006 / E46) To easily replace the front turn signal bulb located near the headlight, it is recommended to remove the turn signal itself, as this is a very simple…
How do you replace the front turn signal bulb of the BMW 3 Series?
How do you replace the front turn signal bulb of the BMW 3 Series?
BMW Serie 3 (1998-2006 / E46) In order to replace the front turn signal bulb of the BMW 3 Series, you need to pry it out with an object so that you can remove the corresponding sp…
Replacing Side Turn Signals on BMW 3 Series E46
Replacing Side Turn Signals on BMW 3 Series E46
BMW Serie 3 (1998-2006 / E46) In this video tutorial, you will see simple steps to remove and replace the bulbs of the side turn signals on a BMW 3 Series E46. First, remove the t…

How to Replace the Battery on a Honda Vision 110

To replace the battery on a Honda Vision 110, you need to remove the front fairing of the motorcycle, located directly under the front headlamp. To loosen this panel, unscrew the two screws found at its top, just below the handlebar. Once these screws are loosened, lever under the panel to detach it, gaining access to the battery underneath: this battery must be removed from its housing by unscrewing the fixing screws and disconnecting the power cables, replacing it with a new one.

Watch the video!


by ScegliAuto

More videos