Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Rear Door Window Regulator Motor on the BMW 3 Series

Model: BMW Serie 3 E46 - Years 1998-2006
Part: Power window motor

Today, you will learn how to remove and replace the window regulator motor. First, remove the door panel to access the motor. Unscrew all the screws on the panel, mostly located in the door armrest (check carefully for any screws on the side of the panel). Now, pull the panel until the clips release so you can take it out. With access to the motor, unscrew the bolts holding it to the door, disconnect the power cables, and replace it with the new one. Reinstall the panel by securing the clips properly, and finally, screw in the screws.

Updated on 7 March 2026 by ScegliAuto

This video is currently unavailable

Related tutorials

Replace Window Regulator Motor on BMW 3 Series
Replace Window Regulator Motor on BMW 3 Series
BMW Serie 3 (1998-2006 / E46) Is the window regulator not working on your BMW 3 Series? Remove the door panel cover to access the interior. Disconnect the battery terminals for sa…
How to Reset the Window Regulator Motor of the BMW 3 Series
How to Reset the Window Regulator Motor of the BMW 3 Series
BMW Serie 3 (1998-2006 / E46) Today, we will see how to reset the window regulator motor of the BMW 3 Series model E46. To perform this procedure, turn on the ignition and press t…
Removing the Window Regulator Motor on a BMW 3 Series
Removing the Window Regulator Motor on a BMW 3 Series
BMW Serie 3 (2005-2013 / E91, E90, E92) How to remove the window regulator motor from a BMW 3 Series? Let's see how to proceed in this video. Disconnect the battery terminals. Use a screwdr…

How to Replace the External Wing Mirror on a Ford C MAX

In the event of a breakage, it will be necessary to replace the external wing mirror on the 2011 Ford C MAX. This operation is easily performed independently. Start by removing the internal cover of the mirror with a plastic lever. Then, use a socket wrench to remove the securing pins. Once the pins are removed, you can take off the mirror, but not before disconnecting the power connectors. Then proceed to fit the new mirror. First, connect the connectors and then secure the mirror to its housing with the pins. Refit the plastic cover and test the operation of the electric mirror using the controls.

Watch the video!


by ScegliAuto

More videos